Temptu Airbrush Gun & Airbrush Paint Gun Home Depot – Pinkiou.Com

Pull it backwards that’s pink airbrush gun holder, so that’s double action, so push down air and pull backwards that speed temptu airbrush gun.And then that’s it, you have gravity Fed which is a no gravity Fed this this one and most of those air brushes a copies on top and then the paint goes from the top and then you have the c fund type, which is this one you have a bottle here or a cup or a bottle and then it siphons like it.It sucks the paint upwards so my quick recommendation, it’s like generally easier to paint with gravity Fed air brushes and don’t get the single action air brushes, it’s too basic in a way and besides the prices of double action air brushes and like way back is ask she a single action.I’m not really sure to be honest, if people sell single actions, these again air brushes have become so much cheaper these days, so this cheap less than ten Dollar air brushes you have it here and then these hubby made air brushes are like around forty dollars so they’re similar very similar with z air brushes which are at the same price arrange sort off, um, and then you have the higher middle range air brushes, this one is a badger 100 LG I think I bought it for 7000 pesos, so that’s roughly around a hundred fifty a hundred fifty dollars and this one evolution is roughly around the same price 250 dollars and of course the infinity which is 300, dollars.Or even more so you have the ten dollars ten dollars the forty Dollar air brushes and 150 air brushes and a 300 Dollar air brushes I used to have a couple of tammy air brushes, I’ve sold them already, and also I had a new ata I also sold them so it’s not that I’m not during the earlier years of like doing gunplay, you always follow what the Japanese users like they use Japanese Spain’s Japanese air brushes, so if big because you want to be as good as them, you tend to get the same tools and the same pains.And so let’s make it quick, what’s the difference between all these air brushes, the ten Dollar air brush 150 and 300 Dollar air brush, obviously one of the obvious like a difference is the finish the finish of the mower expensive air brush at least the infinity is very good, this has been with me for more than a year now and it’s super smooth super nice and it doesn’t feed it hasn’t feed so far then you have the middle range air brush, um, this is a bad example so because the finish is so bad already, but again this is like maybe around ten years old and this one the evolution is around eight years old so you see the anyway you see the differences in the finishing this a more expensive hair brushes.After finished definitely and the cheap essay or Bush is not bad.So, another difference is the weight, um the cheaper air brushes tend to be heavier and the midrange shares at least this model about the same actually this feels heavier, but once you have a bottle here at the bottom, this is really heavy, and then the more expensive the really expensive ones are lighter, so basically while you’re painting, you can just remove the import once you’ve gotten used to the controls here and. It will make their brush later, so painting like eight ten hours is is kind of stressing to the hand if you’re painting with a heavy air brush, but if you just air brush light.Maybe around an hour or two it doesn’t really matter the biggest difference is the controls so the more expensive air brushes a in my opinion, have better controls, so with this one you push for you push for air and then you pull for pain, this one has better very sensitive control in terms of the air and.And been so it’s it’s it has a way better controlled than the cheaper air brushes, the cheaper ones are tend to be really stiff and the airflow control is a bit difficult, but with more expensive air brushes even both the air control and flow control the pain flow and the air flow are have really good, um controls, they’re very sensitive. Now let’s talk about the setup, the setup could be as simple as this one are really small air compressor with the PS eye, the pressure gauge and then it doesn’t even have attack you could also use like really small ones used for painting makeup and I also have obviously the heavy-duty ones which are really really loud, the loud air brushes, I love using them for really long hours like long hours of painting more than eight ten twelve hours of painting and then especially for priming and varnishing, so with this one, the smaller compressors, you don’t really get to control the PS eye pressure and its silent albeit doesn’t really it doesn’t have an air tank meaning you don’t get like a constant pressure.A constant air pressure but it’s usable, I mean it, could I use this for late night painting because the big one is really noisy, so I use this for late night painting as it works so it all depends on what you need and how much time you spend painting.Also, the water tap, um, if you’ve seen those tiny water taps that are put in between the hose and air brushes, so those are very helpful, especially if you have a short host a shorter hoses tend to build up condensation faster, so I’m not really sure, but it will spit water if you don’t have enough water trap, this is not enough to be honest you have to have that small water water tap in between the air brush and hose, but for my bigger setup since it has a really long host, the longer hose.I don’t know the science behind it, but it will never condense enough water that will spit through the air brush so the longer the hose the safer you’ll be especially if you’re painting with lockers, you don’t really want those water spitting setup because it will ruin the paint job, you have to repaint the whole thing, but for acrylics, you just need to blow that away and then use a hair dryer, and then paint over it again once it’s dry so anyway, it’s no longer the host the better it is in terms of preventing buildup of water.And so, lastly for pressure I don’t really advocate that nps I stuff I don’t like it was made popular like ten years ago so but after like air brushing a lot, the past few of the past couple of years, um I don’t really advocate it especially if you have a simpler setup which doesn’t let you control the air pressure, um, you just need to learn the controls of your air brush, so if your detail painting 1520 HP’s eye, you could do detail painting the theming is a bit different but that deserves another video. So if you need control, you press less and you pull less and you do detail painting, so that’s what the controls are for so and then if you want to do base colors, priming or varnishing it could just pull more or I mean push more and pull more more pain will come out of the air brush so again the thing is different, if you want to really be away from the model because you need more thinning sauce for that.A bit more thinning saucer thinner, if it’s too far away, especially for acrylics, it will dry up even before it hits the model so but then again in terms of air compressor or air pressure, you don’t really need a sophisticated a very complex air compressor, just need to learn the controls of your hairbrush.So my recommendation I recommend for first time air brushes to get a basic setup a setup right like around fifty to a hundred dollars that will have a good useable air brush with a fairly good compressor that will give you hours of weekend painting, that’ll be good enough for general use, but if you want more control, you should get 150 Dollar air brushes or even if you could afford the infinity which is like 300, dollars if you could afford it and you could get you want to get a big very big compressor with good a pressure control and stuff I would recommend if you get it so basically so similar with paints and then other tools you get what you pay for, so the mortgage.Spend the better finish you have the better control and its more durable in a way at least the finish, so that’s it.

交流隔离电源变换器

SHYH-CLS-D-xx交流系列隔离电源变换器又称远端机、电源终端、下位机等。主要由隔离变压器(内含固定绕组、补偿软组和输出绕组)、采样单元和控制回路,伺服电机等部分组成。隔离转换器根据采样单元感应输出端的电压与电流变化,经过控制回路的比较放大,然后反馈驱动伺服电机调整补偿绕组的碳刷位置以改变线圈匝数比,从而保持输出电压稳定在固定值。

交流隔离电源发生器

远供系统是通过电力电缆或通信电缆进行直流电能远距传送和接收的供电系统,又叫长距离供电系统或者远距离供电系统,是目前国内大部分省份高速公路机电行业广为采用的一种新技术。北京三合云海科技有限责任公司凭借多年的行业积累和持续研究,结合行业需求和远程通信技术,针对高速公路行业的供电特点,分别开发了直流远程供电系统和交流远程供电系统。

SHYH-CLS-S-xx交流系列隔离电源发生器,又称远程供电系统局端机、上位机,集数字化、人性化为一体的高智能型产品,具有强大的信息采集系统、信号处理系统、侦测系统和完善的保护系统。广泛用于各种用电环境。发生器采用隔离变压器升压,自动调节跟随输出,系统稳定可靠,输出精度高,波形失真小,稳定可靠。

局端机采用个性化设计、具有强大的人机对话功能、直观显示屏以及状态指示监控介面,让用户操作和使用非常简单方便。系统内部采用微电脑和高速AD智能检测模块控制电子模块(IGBT或SCR)的快速切换,采用PWM精细电压调节技术,通过变压器同频、锁相、正弦波叠加补偿等原理保持输出电压精准可靠。软件和硬件均采用抗干扰设计,提高整机的抗干扰能力,设备支持上电自动启动功能,来电无需人工干预可自动重新启动。

流输出
额定输出功率0~100KVA
输出电压范围400VDC~1500VAC
限流可调范围10%~110%无级可调
峰-峰值杂音≤±0.5%
稳压精度≤±0.5%
稳流精度≤±1%
均流≤±5%
效率100%负载≥95%;50%负载≥95.5%
交流输入
额定输入电压三相380VAC
输入电压范围305VAC~530VAC(满载)305VAC~260VAC(线性降至半载)
频率45Hz~65Hz
功率因素(PF)≥0.99
谐波电流(THD)≤5%
输入输出保护保险;防雷电路、欠压保护、输入过压保护、输出过压保护、欠压告警、短路保护、开路保护、电力搭接保护、漏电保护;
监控单元数字LCD显示电流、电压;支持RS485,TCP/IP 通讯
工作环境条件
工作环境温度-40℃~75℃;-40℃~50℃正常工作;50℃~75℃降额输出;
存储温度-40℃~85℃
相对湿度0~95%(线路全部进行防潮处理,适于潮湿地区使用)
海拔2000m满载输出, 2000-4500m降额输出
防护等级IP65
产品安全及可靠性
绝缘强度输入对机壳能承受50Hz有效值2500VAC或等效3535VDC耐压1分钟;
输入对输出能承受50Hz有效值3000VAC或等效4242VDC耐压1分钟;
输入→大地 ≥100MΩ,1000VAC
输入→输出 ≥100MΩ,1000VAC
电压失真度线性负载:THD<1%
抗冲击能力可承受2倍额定电流持续2秒
输入→输出 2120Vdc/1min 漏电流≤10mA
过载能力105%<输出<150%,10秒关断输出
150%<输出<200%,2秒关断输出
200%<输出,立即关断输出
MTBF>120000小时

高音号角

高音号角是一款可安装在室外广场、高速路边、机场、火车车站、网球场、游泳池、高级花园、体育馆、学校等大型公共场所及户外场所的扩音喇叭。其采用铝合金箱体,外观精美,可适用于高温和温差大的环境,箱体抗腐蚀,能抵挡风吹日照风沙雪雨,坚固耐用,采用专业高度防水设计。声音通透明亮,对人声、音乐都有真实的还原特性。声场指向性好,扩声范围大,穿透力超 强及传播距离远,声音覆盖更加广阔,具有宽广的频率响应范围和高效率性能。

□ 功率:50-400W可选;

□ 频响:90Hz~18KHz;

□ 输出:110V定压/定阻可选;

□ 灵敏度:91±2dB;

□ 工作温度:-40℃-70℃

□ 存储温度:-40℃-80℃

电话接入网关

一款基于SIP协议的高性能、高可靠VoIP语音网关,支持全面的协议处理,兼容各种IP-PBX和VoIP语音平台,配有多种接口,实现跨接PSTN、IP语音网关以及传统电话终端,为用户提供高性价比的IP/模拟混合电话系统。设备配置简单、维护方便,提供以WEB为主的多种控制方式,方便远程管理,并且允许多个管理员。

16/24/32/48/72FXS或FXO接口可选,双网口冗余可选;

音质提升技术:回音消除(G.168-2004)、抖动缓冲、静音抑制;

电气保护:过电流和过电压保护机制,双直流/交流电源冗余;

可靠性:主备切换、多机热备、负载均衡、断网逃生、断电逃生;

□ 通信接口:百兆单双口可选

□ 操作系统:Linux

□ 尺寸:424.6mm×44.4mm×260mm

□ 功耗:≤100W

□ 语音编码:G.711、G.722、G.723、G.726、G.729

□ 软件接口:SIP Trunk,第三方接口。

□ 电源:AC220V

手持终端

高性能工业对讲终端,功耗低,语音质量高,携带方便,操作简单。在与之配套的网络覆盖下(802.11b/g/n),手机之间可以实现语音通信,短信通信。手机具有较高的接收灵敏度,保证最大限度的发挥无线网络功能。WIFI手机平均工作功耗较低,具有较长的待机时间。手机使用可充电的锂离子电池,可以使用原装配套的座充进行充电。

开机:长按开机键开机,背景灯亮,自动连接网络并注册到服务器。

拨打电话:待机状态下,按对应的数字键输入要拨打的电话号码。

接听来电:当有电话来时,会响铃提示,此时可按呼叫键来接听。

拒接来电:当有电话来时,可以按挂机键拒接来电。

结束通话:通话完毕后或者拨号后想取消,按挂机键来结束通话。

调整音量:可通过菜单调整音量,也可在通话中按左右键调整。

关机:在待机模式下,长按挂机键可关闭手机。

□ 手机尺寸:118 * 52 * 22(mm)

□ 待机时间:大于80小时

□ 通话时间:大于4小时

□ 无障碍最大通话距离300米

□ 支持中/英文界面显示,支持中/英文输入法

□ 支持TFT彩屏显示

无线基站

采用高强度铝合金壳体和专业元器件设计和生产,支持室外大面积环境覆盖,无线传输距离可达 300米。无线速率可达300Mbps,可外接全向高增益天线、定向平板天线。IP65 防护等级,适应风吹、日晒等各种恶劣环境。支持网关、中继、网络基站三大工作模式。

□ 接口信息:1*RJ45 10/100M (支持POE)

□ 内存&闪存:64MB+8MB

□ 天线接口:2T2R N型接口

□ 电源:PoE/ 24V供电

□ 遵循标准:IEEE 802.11b/g/n

□ 工作频率:2.4-2.483GHz

□ 发射功率:26+1dBm

□ 接收灵敏度:不低于-82dBm

□ 无线安全:64/128-bit WEP,WPA/WPA2

□ 工作温度:0℃-40℃

□ 存储温度:-40℃-70℃

□ 工作湿度:10%-90%,无凝结

□ 存储湿度:5%-95%,无凝结

对讲话机

企业级智能电话,采用Android系统,支持高保真全宽带音频手柄和带回音消除的全双工免提扬声器,支持数字信号处理(DSP),支持静音抑制、VAD(回音检测)、CNG(舒适噪音产生)、回音抑制和自动增益。

通信功能:支持不少于 6 条 SIP 线路,支持多路呼叫排队、支持呼叫前转、转移、呼叫保持、呼叫等待、三方通话、呼叫驻留、抢接、强插、自动回拨、点击呼叫、自动二次拨号、灵活的呼叫控制功能。灵活拨号,支持热线号码、主叫拒接、黑名单拒接等。

电话功能:来电显示/来电隐藏、呼叫等待、呼叫保持、呼叫转移、呼叫驻留、免打扰、呼叫转接、三方会议、摘机自动拨号、自动应答、静音、转接、抢接、点击拨号、呼叫等待、呼叫记录(最多 2000 条)等。

□ 四核处理器,安卓 4.2以上 操作系统,7寸TFT电容多点触控屏;

□ 支持SIP 2.0(RFC3261)以及相关的RFC;

□ 支持WEB管理,系统配置及软件升级;

□ 语音编码:G.711,G.722,G.723,G.726,G.728,G.729A/B

□ 视频编码: H.264 / H.263

□ 电源: AC 100-240V/ DC 12V@1A

□ 网络接口:10/100/1000 Base-T RJ-45自适应以太网口

□ 接口类型:1*HDMI-Type A,1*USB2.0

□ 工作温度:-10℃~+40℃

□ 工作湿度:10%~80%(无凝结)

□ 存储温度:-40℃~+60℃

□ 存储湿度:8%~90%(无凝结)

广播终端

产品采用金属面板制作,支持SIP协议,自动服务器注册,WEB界面管理; 支持2路报警输入/输出,可连接传感器或控制终端;支持组播协议,节省网络带宽;支持喊话优先广播功能,自动恢复音乐广播;支持终端阻抗自动匹配,输出音量自动调节;双网口配置,可选PoE功能。支持状态显示,在线离线运行状态等状态指示灯。

□ 网络协议:SIP2.0、RTP、RTCP、SRTP、HTTP、HTTPS

□ 网络接口:100兆 RJ45*2

□ 窄带编码: G.711a/u、G.723.1、G.726-32K、G.729AB

□ 宽带编码: G.722

□ 外置有源音箱音频输出口

□ 录音输出口接口

□ 电源:9V~16V/1A DC/POE可选

□ 工作温度:-30℃~+70℃

□ 工作湿度:10%~90%(无凝结)

□ 存储温度:-40℃~+80℃

□ 存储湿度:8%~95%(无凝结)